Triangle Celius with outriggers
Just quick note to let you know that I got your outriggers installed. The design and workmanship of your product is outstanding and has elevated the sound of my Triangle Celius (Stereophile class "A" rated) speakers to another level. My wife and I are looking for another pair of speakers for our family room and you can be sure that I will be ordering a set of outriggers for them. Thank you again for your help.
Product is superb
The outriggers arrived yesterday. It was a very nice surprise to receive them earlier than expected!
The quality and finish of your product is superb. You have truly exceeded my expectations.
I'll continue with speaker placement this week and will report back to you with my listening experiences. Just wanted to keep you posted and say thank you.
I'll also be happy to send a recommendation with photos for your website after speaker placement is completed.
Thank you so very much,
New Zealand totara with outriggers
I received my outriggers about 2 weeks ago but only finished the bases for my speakers yesterday. The bases are made of New Zealand totara and are filled with sand. They add about 15 pounds to each speaker and in combination with your outriggers should make it very difficult for the dog to knock them into the walls anymore! The top of the speakers are now nearly 40" from the floor but they are incredibly stable.
The other new addition to my set-up is some DIY (but not by me) speaker cables made from braided multiple pairs of Cat5 ethernet cables. The addition of your outriggers seem to have further increased the extra depth and weight of bass frequencies that the cables brought. I can now use the Direct setting on my amp where before I had to bump up the bass with the tone controls.
Thanks for such an excellent product,
The sound improvement is quite noticeable
Just installed the outriggers on the speakers.
They are looking great. The sound improvement is quite noticeable, especially in the bass - much more focused.
For the first time ever, I was able to move my speakers around without being afraid of knocking them down, - and I by proper positioning, I've got a much bigger soundstage. The outriggers are very stable, and the ability to adjust each cone separately using the knobs is really great!
You've got an excellent product!
Thank you Doak
The Outriggers provided an elegant solution to the problem I had of needing to angle my speakers down a couple of degrees to align the main driver with my ear height at the preferred listening position. Besides that, the expanded base and easy/precise adjustability makes these speakers seem to be BOLTED to the floor - a VERY good thing indeed. This means that ALL of the drivers' energy is spent on producing music and NOT in rocking the speaker around. A win/win for sure!Best Regards,
Adagios with outriggers
Hi Paul. Its been over 2 months now since the outriggers for my Adagios were installed. They are now rock solid to the floor. The sound improvement floored me, no pun intended. The bass is much better along with the highs and mids. These outriggers should be required for the Adagios. Otherwise, the spikes that comes with the speakers, just are not good enough to bring out the best in these wonderful speakers. Highly recommended. Much thanks.
B&W 704 with outriggers
Got the package today, and installed both stand/base. I'm very satisfied with the product, excellent craftsmanship. They look and feel awesome.
Keep making good product in the ol' USA. B&W 704.
Odyssey Lorelei’s with outriggers
Verity Parsifal Encores with outriggers
I installed the outriggers yesterday. All went well. It did take three of us to get the speakers upright and on the little floor cups. I am listening today. No huge changes, but the bass is tighter and better integrated into the overall sound. What I really love is the ability to fully balance my speakers and adjust the tilt for the tweeters. Moving the speakers is also easier. Our house is a 1920's Tudor and the floor is very caddy wampus (sp?). The plinths allow me to adjust for that and also give increased stability to my Verity Parsifal Encores. A great product - thanks!
Dali Euphonia MS5’s with outriggers
A/D/S with outriggers
I’ve been thoroughly enjoying the looks and audible benefits of the Soundocity Outriggers. My soundstage is clearer and more open, and bass is better defined with more impact (given that they’re now anchored to the subfloor).
While doing the research, I didn’t find any a/d/s speakers listed for reference – they use the ¼-20 standard thread.
I’ve attached some pics for ...whatever you want to use them for!
Thanks again for everything,
JM Lab Electra 946 with outriggers
JM Lab Electra 946
I did get the outriggers yesterday and I have to say that they are very well built and looks great! Its the best spikes i ever bought! Really happy with them! Here you got 2 pictures!
Ohm 4 speakers with outriggers
Attached are some pics of the outriggers installed on my Ohm 4 speakers. The outriggers have allowed the speakers to image better with improvement in the midrange frequencies. Bass notes now are more defined. I also like the stability they provide. Thanks for a great product!
NHT Classic 4 with Soundocity Outriggers
Piega C3-LTDs with the outriggers
Just wanted to let you know that I received the outriggers for Christmas and they are simply fantastic. My concerns earlier was that there was only one spike in the back similar to the Adagios you mentioned and I wouldn't be able to resolve the difference in speaker width between the front and back. Everything connected easily as you had mentioned and I am quite impressed with the quality and looks of the outriggers. The spikes are deep enough to penetrate the carpeting. I had thought I would have to resort to making these but the cost was reasonable and the fit and finish are first class.
Please feel free to use my feedback as you wish as this was actually my favorite Christmas gift this year. Attached are pictures of my Piega C3-LTDs with the outriggers you can also use as you feel.
Merry Christmas/Happy Holidays,
Dali Euphonia MS4’s and the coupling of speaker to floor is rock solid
with high regards,Fred
Jersey City, NJ 07305
Olaf speakers with outriggers
Finally the project is finished. Please, see attached photos. I’ve only build the subwoofers/speaker stands. We called them “Olaf”, because of SEAS drivers, made in Norway. The customer had the top speakers (Ellis Audio) before. The Outriggers work fine. They sit atop “Herby Dots”, as seen in a detailed picture.
"These Outriggers have brought back some of the fun that turns people into Audioholics in the first place.""I can not express in words the convenience of having the spike adjustment on the side of the speaker. It is… an indescribable difference."
Associate Editor, Audioholics.com Click here for full review.
Daedalus Audio Ulysses with outriggers
The outriggers installed in my Daedalus Audio Ulysses speakers without a hitch. It's really great to have the ability to fine tune the speakers' coupling with my carpeted floor and to adjust their rake. Thought you might enjoy seeing these.
HT3’s – noticeable improvement in the mids
Stablizing Virtually Every Make And Model
Of Loudspeakers In The World.
Proven Stability and Sonic Improvement
Made from 1/4″ solid steel bars with brass cones our outriggers provide unequivocal stabilizing and precision leveling not found with standard speaker spikes. The improvement is immediate from the creation of a larger and more stable footprint. Costing the same as some speaker spikes alone there is simply no reason why you shouldn’t upgrade today. Read More