|
The VooDoo Reference cables gripped the bass and held on like an
800-pound gorilla!
The lows were held in iron control, while the highs soared into
space.... smooth musicality, coupled with their ability to bring out
the tiniest details...The Reference cables will satisfy the needs of
a system in the $20,000-plus range, for a down-to-earth sum of
around $1500!
- Ed Morawski, Positive Feedback Read Complete Review
The VooDoo Reference Speaker
Cable has been designed and engineered to reveal accurate dynamics
and high definition harmonic resolution in audiophile systems. The
VooDoo Reference Speaker Cable has full bandwidth transparence,
exceptional mid-range presence and liquidity, and extremely accurate
low-frequency response that has been achieved by a refined balance
of capacitance, inductance for optimal harmonic resolution and
coherent phase-linearity.
The Reference Speaker Cable is constructed with three discrete
conductor groups. Each group is made of pure silver and long-grain
oxygen-free copper conductors is encapsulated in ISO-grade Teflon�
air-core dielectric and wound in a concentric lay to proprietary
specification for optimal capacitance and induction. All of the wire
and connectors used to build VooDoo Reference speaker cable have
been treated in our proprietary cold fusion deep-immersion cryogenic
treatment process at minus 315 degrees Fahrenheit
(-192 Celsius) to realign and fuse the molecular structure of the
conductive metals and alloys. The over-whelming benefit of this
metallurgical transformation is significantly less resistance for a
lower noise floor within each conductor for a significantly quieter,
higher resolution, phase-accurate signal path.
The Reference Speaker Cable is protected from EMI and RFI corruption
by a concentric active shield that creates a dynamic induction field
around signal conductors for accurate phase linearity and controlled
inductance. The audible results are balanced dynamics and full-range
transparency with extremely smooth high frequency response, and
accurate low and sub-sonic frequency extension.
Available with cryogencially treated Cardas/Colver 1/4" rhodium over
silver-plated high-purity copper billet spade or Cardas rhodium over
silver-plated banana termination. Neutrik Speakon termination is
also available. For three-wire home theater or multi-channel sets,
please call with length and termination for best pricing. For a
recommendation for your system, please contact us by email.
Reference -
Cardas 6mm or 9mm Rhodium/silver-plated spade and banana lug
termination
Single Wire Pair
|
4 Feet $700 |
6 Feet $800 |
8 Feet $900 |
10 Feet $1000 |
|
|
|
|
|
Bi-Wire Pair
|
4 Feet $800 |
6 Feet $900 |
8 Feet $1000 |
10 Feet $1100 |
|
|
|
|
|
Back to Main
Speaker Cable Page
Brass
& Granite Audio
www.Oregondv.com
PO Box 7591
Salem, OR 97303
See our our other sites:
www.soundocity.com
www.speakerfeet.com
www.speakerfeet.net
www.soundocity.com/beta/
www.loudspeakerstands.net
|
