"The Ultralinear speaker
cables... seemed to be more of a "nothing but air" essence in the
background, and the speaker cables seemed able to express everything
from the slightest instrumental reverb trails and vocal nuances to
the roundest of wooded tones. As with the interconnects, there was a
nice balance to everything, with vocal sibilants riding naturally
along with the rest of the voice, and bass lines never overly
intruding into the mix."
- Tim Shea, SoundStage! Read Complete Review
VooDoo Ultralinear Speaker Cable has been designed to equal or
surpass the performance of the finest speaker cable available in
high-end audio today. With increased performance demands of SACD and
DVD-A source material, ultrasonic and subsonic harmonic intervals
have a tremendous effect on the entire dynamic range. Extremely
smooth and transparent HF and LF extension, greater finesse of
midrange sonority and transient speed, with full-range dynamic
accuracy are the sonic improvements you will hear with the
Ultralinear Speaker Cable in your system.
VooDoo Ultralinear Speaker Cable is constructed with three discrete
conductor groups. Each high-purity silver and long-grain copper
conductor is encapsulated in ISO-grade Teflon� air-core dielectric
and wound in a concentric lay to proprietary specification for a
balanced ratio of capacitance to inductance. All of the wire and
connectors used to build VooDoo Ultralinear Speaker Cable have been
treated in our proprietary cold fusion deep-immersion cryogenic
treatment process at minus 315 degrees Fahrenheit (-192 Celsius) to
align and fuse the molecular structure of the conductive alloy
crystals. The over-whelming benefit of this metallurgical
transformation is significantly less resistance for a lower noise
floor within each conductor. The Ultralinear Speaker Cable is
protected from EMI and RFI corruption with a concentric active
shield that creates a dynamic induction field around signal
conductors for accurate phase linearity and controlled inductance.
The audible results are balanced dynamics and full-range
transparency with extremely smooth high frequency response, full
range transparence, and accurate low and sub-sonic frequency
extension.
The Ultralinear Speaker Cable is terminated with cryogenically
treated Cardas/Colver rhodium over silver-plated 6mm or 9mm solid
copper billet spade. Cardas/Colver locking lug banana connectors are
also available upon request. Neutrik Speakon connectors also
available. For multi-channel home theater cable sets, please contact
us for package pricing. For a recommendation for your system, please
contact us by email.
Ultralinear
- Cardas 6mm or 9mm
Rhodium/silver-plated spade and banana lug termination
Single Wire Pair
4 Feet $1000 |
6 Feet $1200 |
8 Feet $1400 |
10 Feet $1600 |
|
|
|
|
Bi-Wire Pair
4 Feet $1200 |
6 Feet $1400 |
8 Feet $1600 |
10 Feet $1800 |
|
|
|
|
Back to Main
Speaker Cable Page
Brass
& Granite Audio
www.Oregondv.com
PO Box 7591
Salem, OR 97303
See our our other sites:
www.soundocity.com
www.speakerfeet.com
www.speakerfeet.net
www.soundocity.com/beta/
www.loudspeakerstands.net |