These spikes are perfect for
larger speakers or sub woofers.
They are machined
from brass and have a Gold Nickel base and a Black Chrome tip.
They are
1.50" tall not including threaded rod and are 1.25" wide.
The threads are
available in 1/4-20 (standard) and custom threads of M6 (6mm), 5/16,
M8 (8mm), 3/8, and 1/2". Please see the Speaker Thread Sizes by
Manufacturer page to find the thread size for your speakers.
If your speaker
does not have an insert already installed, no problem. Each standard
1/4-20 spike comes with a 1/4-20 stud and threaded insert. The
threaded insert can easily be screwed into a 9 mm pre-drilled hole
with an M6 or 7/32 Allen wrench. No need for this insert if your
speakers already have inserts installed. Be sure to order the 1/4-20
(standard) to include the 1/4-20 stud and insert.
These are very
heavy duty spikes and great for larger loudspeakers or subwoofers.
The spikes do not come with
the match floor cups but they can be added to your order by
following this link. Brass
Floor Cups.
** Spike Tip **
- Mount (2) of the 1.50" spikes on the
rear and (2) of the 2.10" spikes to the front of your speaker to
obtain the correct "tilt" for correct imaging.
Not sure of your
threads sizes for your loudspeakers? Click here!
Standard
1/4-20 Thread Size
Main Speaker Spike Page
Speaker Spike FAQ Page
Custom Thread
Types
Thread
Size |
Price
each |
|
M6
(6 mm) |
$11.75 |
|
5/16" |
$15.75 |
|
M8
(8mm) |
$16.75 |
|
3/8" |
$17.75 |
|
M10 (1.5 pitch) |
$19.25 |
|
Main Speaker Spike Page
Speaker Spike FAQ Page